How To Make Your Own Deckchair Canopy Cover

Watch as we show you in 6 simple steps how to make your own deckchair canopy cover using our unique stripy fabric and pompom fringe. You can see our huge range of deckchair fabrics and pompom bobble fringes on our website

Video Transcript

How to recover a deckchair canopy from The Stripes Company

Step 1. Preparing Your Fabric

Notes.

For most deckchair canopies you will need 2m of deckchair fabric cut in half to make 2 x 1m lengths which you will pin and then stitch together.

Step 2. Sewing Together

Notes.

Iron the seam flat.

Step 3. Measuring Up

Notes.

You will need approx 3m of bobble fringe.

Note the front and back measurements of canopy frame (back may be narrower)

To find the depth of the overhang subtract your canopy width from the width of the fabric and then divide the remaining measurement by two. Note this down. Do this for front and back.

Step 4. Creating The Corners

Notes.

Fold the corners and using the previous measurements mark with a pin (remember front and back are different).

Repeat for all four corners.

Stitch and then cut off the surplus fabric from each of the four corners.

Step 5. Adding The Bobble Fringe

Notes.

Start at a corner seam folding in the edge of the fabric the width of the bobble trim and pin all the way around the canopy before stitching.

Step 6. Finishing Off

Notes.

Tacking the corners is optional.

Enjoy your canopy

It is that easy! Create your own deckchair canopy with deckchair fabric and bobble fringe from The Stripes Company.